I can supply replacement ROUND section Nitrile drive belts for the projectors
listed below
I even use them on my own machines
All belts are brand new, and have not been salvaged from old projectors as is sometimes the case
-----------------------------------------
For other payment methods please contact me via email
-----------------------------------------
In stock = Normally sent on receipt of payment ##
Special order = Not kept in stock, but normally can be obtained & sent out in 7 days ##
## Not guaranteed times for Easter, Christmas, or Bank holidays
When fitting, or removing, belts make certain that the projector is not connected to the mains electricity supply
|
Elf - EIKI 4mm Take up Belt
|
£9.50 Each
|
Special Order
|
|
|
£6.00 Each
|
In Stock
|
|
|
£6.00 Each
|
In Stock
|
Elf - EIKI EX1500 Take up Belt
|
£6.00 Each
|
In Stock
|
Elf - EIKI EX1500 Drive Belt
|
£9.50 Each
|
Special Order
|
|
|
£6.00 Each
|
In stock
|
|
|
£6.00 Each
|
In stock
|
Bell & Howell DCT Drive 1 (Not the 'V' belt)#
|
£4.50 Each
|
In stock
|
Bolex 18-5 Set of Two belts for three belt model
The above two belts are a direct replacement for the three belt projector
I can not supply belts for the single flat belt machine
|
£9.00
per pair
Only sold as a pair
|
In stock
|
Bolex 18-3
|
£4.50 Each
|
In stock
|
Gaf 203 slide projector fan belt
|
£4.50 Each
|
In Stock
|
Specto Greyline Spool Drive
|
£4.50 Each
|
In Stock
|
Specto Royal Spool Arm Belt
|
£4.50 Each
|
In stock
|
Specto Windsor Motor Drive
|
£6.50 Each
|
Special Order
|
Specto (Upright Model) Drive Belt
|
£8.50 Each
|
In stock
|
Specto Royal Motor Belt
|
£8.50 Each
|
Special Order
|
Specto Royal Motor to Arm Belt
|
£4.50 Each
|
In stock
|
Consul 8mm
|
£4.50 Each
|
In Stock
|
Hanimex Loadmatic 924
|
£4.50 Each
|
In Stock
|
Hanimex Loadmatic AL
|
£4.50 Each
|
In Stock
|
Hanimex Loadmatic IQ Dual
|
£4.50 Each
|
In Stock
|
Hanimex 808
|
£4.50 Each
|
In Stock
|
Eumig P8 etc Drive Belt
Warning. As the motor pulley on the P8 is live, when the projector is connected to the electricity mains, always make certain that the machine is not connected when removing, or fitting, belts.
Do not experiment with a metal drive belt as this will become live when projector is turned on. Only use rubber belts.
|
£4.50 Each
|
In Stock
|
Eumig 501 Drive 1 Belt
|
£4.50 Each
|
In stock
|
Eumig 502D
|
£4.50 Each
|
In stock
|
Eumig 510D
|
£4.50 Each
|
In stock
|
Eumig 605D Drive Belt
|
£4.50 Each
|
In stock
|
Eumig 607D
|
£4.50 Each
|
In stock
|
Eumig 610D Drive Belt
|
£4.50 Each
|
In stock
|
Pathe Baby Take up Small
|
£4.50 Each
|
In stock
|
Prinz Magnon
|
£4.50 Each
|
In Stock
|
Prinz Compere
|
£8.50 Each
|
In Stock
|
Sekonic 80P
|
£4.50 Each
|
In Stock
|
Sankyo Dualux 1000/2000 Drive 1
|
£4.50 Each
|
In Stock
|
Toei Talkie Drive
|
£8.50 Each
|
Special Order
|
Voigtlander Dynalux Super 8 Motor Drive
|
£4.50 Each
|
In stock
|
Cinerex 707 Belt
|
£4.50 Each
|
In Stock
|
Cinerex Dual 8 Model 934
|
£4.50 Each
|
In Stock
|
Boots Auto 8 Zoom
|
£4.50 Each
|
In Stock
|
Ditmar Duo Belt
|
£8.50 Each
|
Special Order
|
Omo Super 8 drive
|
£8.50 Each
|
Special Order
|
IMAC DUA 300
|
£4.50 Each
|
Special Order
|
Russian PYCB
|
£4.50 Each
|
In Stock
|
Silma 240S
|
£8.50 Each
|
In Stock
|
Silma Compact 8
|
£4.50 Each
|
In Stock
|
Yelco 8mm LSP 510
|
£4.50 Each
|
In Stock
|
** These belts fit the black/brown Elf machines. They may not be suitable
for the blue machines
Please contact me for more details
=========================================
If you have a NT Model EIKI then these round section motor belts will
fit up to Serial No 50000 only
NT Models with Serial Nos 50001 and above require a flat grooved belt
These are not easy to obtain as they appear to be a specialist belt
Whilst I can sometimes obtain these flat belts they are expensive
Sorry, but I have to charge £16.00 plus postage of £1.25
=========================================
UK and Southern Ireland Please add 50p postage
All other EU or European countries please add £1.50
All other countries please add £2.50
-----------------------------------------
Any belts not listed please e mail your requirements and I will find out
if I can obtain them
Please include make & model of projector, and if possible the thickness, and outside circumference, in mm, of the required belt
Thank you.
|
